bcm-v4

[Specification

Sequence Bits

Sequence Number

Meaning

Value

0

RX to TX

1

1

TX to RX

2

2

reset to RX

32

3

update gain H

4

4

update gain L

8

5

update gain U

16

N PHY Force RF Sequence (u8 cmd)

  1. If cmd > 5

    1. Return
  2. save PHY register 0xA1
  3. Set bits 0x0003 in PHY Register 0xA1

  4. OR PHY Register 0xA3 with the value from the table (indexed by cmd)

  5. Loop up to 20000 times
    1. If the value bit is cleared from PHY Register 0xA4

      1. Break from the loop, the Sequence is completed
    2. Delay for 10 uSec
  6. Restore phy reg 0xA1

Exported/Archived from the wiki to HTML on 2016-10-27