bcm-v4

[Specification

Set the TX IQ value in the PHY

  1. Read the Maximum RF TX VOS value from Radio Register 0x1E

  2. Loop over the I and Q values
    1. Create the TX VOS value by left shifting the I value by 4 and then OR'ing the result with the Q value AND'd with 0xF
      1. If this TX VOS value matches the Maximum RF TX VOS value
        1. Write the Optimal IRQ re-balance value corresponding to these I and Q values to PHY Register 0x69


Exported/Archived from the wiki to HTML on 2016-10-27